HOHXEN 115mm Hole Saw,M44 HSS Bi-Metal,Hole Opener Drill Bit Cutter Tool for Wood Aluminum Iron Sheet Pipe Plastic

Product Information

Its tough tungsten carbide tipped teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf.

Hole Saws | Drilling | Screwfix 105 mm Hole Saws | Drilling | Screwfix

Manufactured with hardened and abrasion-resistant high-speed steel teeth and a tough alloy body and cap, it is designed for use with battery-operated power tools. Starrett Diamond Brick and Masonry Dri-Core Drills are designed for intensive dry cutting on brickwork and blockwork. Our General Purpose range of hole saw kits are suitable for electricians, plumbers, contractors, industrial use and DIY enthusiasts.

This saw is particularly suitable where there is a requirement for a high-quality surface finish on the entry and exit hole and provides a smooth cut when cutting traditional lath and plaster. High performance Diamond Grit Tile Drills are ideal for drilling small diameter holes in many non-metallics. The removal of the core from the hole saw after a cut is also much improved by the rapid release of the hole saw from the arbor. The Carbide Tipped Deep Cut (CTD) Hole Saw is the perfect solution for repeated intensive drilling in mild and stainless steel, cast iron, aluminium and copper of all thicknesses up to and including 25mm (1”).

Hole Saw 4.5-inch/115mm Cutting Dia Hole Cutter Rannb Carbide Hole Saw 4.5-inch/115mm Cutting Dia Hole Cutter

Featuring a synthetic diamond grit cutting edge permanently bonded to a tough steel body, this provides the necessary clearance for cutting at high speeds.This 3-ply tooth grind delivers a fast cut, minimal snag when the saw begins the cut, efficient swarf removal minimising heat build-up and maximum saw life. The Starrett CTD hole saws feature three different angles ground onto the cutting face of each tooth on the saw. Standard arbors with a pilot drill are suitable for use with hole saws from 14mm (9/16") diameter to 210mm (8. The Deep Cut saw features an increased depth of 51mm (2") and is ideal for cutting metal and tubes with a thickness of greater than 3mm, and wood up to 51mm (2") thick. A cost-effective solution for cutting through nail-embedded wood, or virtually any wood and metal combination, reinforced concrete, and fibreglass.

Hole Saws | Drilling | Tool Accessories | Sydney Tools Hole Saws | Drilling | Tool Accessories | Sydney Tools

Crafted from durable materials and featuring sharp teeth, these hole saws are engineered for efficiency and longevity. Our Water Coolant Dispenser is small enough to fit into your pocket, but still large enough to contain sufficient water to cool a substantial number of diamond tile drill or hole saw cuts. The diamond-tipped edge is produced from a uniform coating of synthetic diamond grit bonded to a durable steel platform, which provides exceptional performance at high speeds and effective cutting action on brick, non-hardened glass, ceramic, tiles and stone.Whether you're working with wood, drywall, metal, or plastic, we are sure to have the right option for your job! They are particularly suitable for plumbers, electricians and other installation engineers and an invaluable tool in the construction of flues, air vents and plumbing or electrical channels. They are compatible with most standard drill chucks, making them easy to use with your existing equipment. The ULTI-MATE rapid release arbor system from Starrett offers super fast, tool-free changes between different diameters and types of hole saws, without adjustment of the drill chuck.