If you need to apply edge banding to a curved surface, you can–it just might take a little more maneuvering. When I didn’t have any sealing irons and needed to reach an area where my clothing iron couldn’t, using the curling iron helped me complete this job in no time at all. If you want types of edge banding that can be glued to any type of material, choose types like ABS, polypropylene, or edge banding.

Edge banding iron DET-004 | Systems and accessories | CMT

Many different species of wood are available, such as maple veneer, oak veneer, walnut, cherry and birch.

Unit comes equipped with a 4' 9", 110V power cord, metal stand, and cotton sock for more delicate fabrics and films. When you run on iron along the adhesive, it melts the adhesive and adheres the veneer to your surface. If you’ve been wondering how to differentiate the types of plywood and edge banding, this post is for you.

5 Best Irons for Edge Banding in 2023 - The Tools Mag

You just need a special machine for the job, so it’s more suitable for commercial projects than residential ones. Now let’s check what types of edge banding are out there so that you can choose the best one for your project. Hardwood Edge Banding: This type is more complicated than iron-on edge banding because it has a lot more steps involved in installing them on your project. The last step is the same as other types of veneer edge banding, cut off the excess rubber with a trimmer and save your time by avoiding the hand-sanding process. If you’re doing a lot of DIY projects, you might want to invest in a cheap iron to keep just in your garage.

You don’t know which tools are best suited for doing so quickly without much trouble or pain from continuous working hours?

What Is Iron-On Edging? | Cadre Components | Edge Banding

Remember to use caution when doing anything with iron, especially regarding how hot it can get or how hard you press down while using them because they are very dangerous if used incorrectly! It will be really easy because you nailed it on there in the first place and all you have left to do is roll over that piece for about 30 seconds or so. After cutting the edge banding to a slightly larger than the desired width, place it over the plywood edge and use your hand or clothes iron at high temperature to apply pressure on this piece for about 20 seconds.After 20 seconds, you will need to take it off and what’s left is a glued-up plywood edge with a nice-looking piece of oak or maple wood at the top which usually matches your tabletop in color nicely. Compared to PVC and veneer, oak is much more durable, recyclable, easy to fix, strong, and economical. Just remember that if you are using a clothes iron, make sure there’s no water inside because it can get hot enough to melt some of these kinds of glue joints. The cotton sock protects your covering and the coating on your heat-sealing iron and prevents scratching and marring.